Serving the Lincoln area  ·  (402) 858-4652  ·  Open Mon-Sun 7am-7pm
📞 (402) 858-4652 Free Quote

Metal Roofing in Ashland, NE (68003) · Local Professionals

Lincoln Metal Roofing · Fast response in Ashland and the Lincoln area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+217Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Ashland sits right on the Platte River where Saunders County meets the Lincoln metro, and the housing stock tells that story clearly: older river-town cottages with tin roofs that have seen decades of weather, farmhouses on the edges of town, and mid-century homes closer to the highway. If you live near Ashland City Park or along the main drag through town, you know how fast a spring hailstorm can turn a quiet afternoon into a roofing emergency.

Homeowners in Ashland (68003) call Lincoln Metal Roofing because we understand the mix of older roofs and newer construction here. From the cottages near the river to the farmsteads just outside town, we have seen what Nebraska wind and hail do to shingles and old metal. We are fully insured and ready to give you a straight answer about your roof.

Metal Roofing in Ashland (68003)

Ashland sits on the Platte River bottom, and that means a few things for roofing. The ground can shift with the freeze-thaw cycles, and older homes near the river often have roofs that were patched together over the years. Many of the cottages and farmhouses around town have original tin or corrugated metal that is due for repair or replacement. We also see a lot of wind-driven rain and hail that beats up shingles and loosens fasteners on metal roofs. The tree canopy in older parts of town drops limbs and debris that can puncture panels or clog gutters, and ice damming at the eaves is common on homes with steeper pitches.

Our team has worked on everything from small cottages in Ashland to larger farm buildings outside town. We know how to handle the tight lots near the river and the access challenges on rural properties. Whether you need a full standing seam installation or a repair on an old tin roof, we bring the right tools and experience for the job.

Our services in Ashland

How a Job Works in Ashland

Step 1: Give us a call at (402) 858-4652 or fill out our contact form. We will schedule a free on-site assessment at your Ashland property. We look at the roof, the attic, the flashing, and the gutters, and we give you a written estimate with options. No pressure, no sales pitch.

Step 2: Once you approve the estimate, we pull the necessary permits with the local building department (requirements vary by jurisdiction, so we verify with the city). We order materials and schedule your project. For homes in tight spots near the river or in older neighborhoods, we plan access carefully to avoid damage to landscaping and fences. If your home is in a historic district or HOA, we help you get the design approval before we start.

Step 3: After the work is done, we clean up thoroughly. We use magnetic sweepers to pick up nails and screws, and we haul away all old materials. We walk the property with you to make sure you are satisfied. We do not leave until you are happy with the result.

Pricing for metal roofing in Ashland depends on the size and complexity of your roof, the material you choose, and the condition of the existing structure. For a typical ranch home, metal roof installation starts around $8 per square foot, standing seam starts around $10 per square foot, and a full replacement starts around $9 per square foot. If you are retrofitting over existing shingles, that starts around $7 per square foot, but keep in mind local code limits the number of layers you can have. Repairs start at $450, and screw replacement or re-fastening starts at $750. For a free estimate tailored to your Ashland home, call (402) 858-4652.

My cottage near the Platte River has an old tin roof that leaks. Can you repair it or do I need a full replacement?
We can often repair old tin roofs if the leaks are isolated and the metal is still sound. We will inspect the roof, find the source of the leak, and give you an honest recommendation. If the roof is beyond repair, we can discuss replacement options that fit the character of your home. Call us at (402) 858-4652 to schedule an inspection.
How quickly can you respond to storm damage in Ashland?
We prioritize storm damage calls because we know how urgent it is to stop water from getting into your home. Call us at (402) 858-4652 and we will schedule an inspection as soon as possible, often within 24 to 48 hours depending on the severity of the storm. We provide free inspections for storm and wind damage.
What does a metal roof cost for a typical Ashland home?
For a typical single-story home in Ashland, you can expect metal roof installation to start around $8 per square foot, with standing seam starting around $10 per square foot. The final price depends on the roof size, pitch, material, and any repairs needed to the decking. We give free estimates so you know exactly what to expect.
Do I need a permit for a metal roof replacement in Ashland?
Roofing permits are commonly required for a full replacement or re-roof in Ashland, and the requirements vary by jurisdiction. We handle the permit process for you and make sure the work meets local building codes. We always defer to the local building department for the final say on what is required.
My neighbor and I share a property line, and I want to install a metal roof. Do I need to worry about setbacks or HOA rules?
Property line setbacks for roofing usually relate to overhangs and drainage, and HOA rules can restrict panel profiles and colors. We recommend checking with your HOA and the city before you start. We can help you understand the requirements and coordinate with your neighbor if needed.
Are you insured for roofing work in Ashland?
Yes, we are fully insured with general liability and workers' compensation coverage. We are happy to provide proof of insurance before we start any work on your property.
What maintenance does a metal roof need in Ashland's climate?
In Ashland, metal roofs benefit from annual inspections, especially after hail or wind storms. Check fasteners and seals around flashing and skylights, and keep gutters clear of debris from the trees around town. We offer maintenance plans and inspections to keep your roof in good shape.
Why choose us?

Trusted professionals in Lincoln

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Lincoln

All your work handled by qualified professionals in Lincoln

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

217+ Verified Client Reviews in Lincoln

⭐⭐⭐⭐⭐ 4.9/5 · 217 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Lincoln · Response within 24h · No commitment · ☎ (402) 858-4652

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Lincoln ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm