Serving the Lincoln area  ·  (402) 858-4652  ·  Open Mon-Sun 7am-7pm
📞 (402) 858-4652 Free Quote

Metal Roofing in Cheney, NE (68526) · Local Professionals

Lincoln Metal Roofing · Fast response in Cheney and the Lincoln area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+217Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Cheney sits just east of the Lincoln airport, where newer subdivision homes and working farm lots take the open-field wind head-on. If you live out here, you already know that spring hail and straight-line gusts test every roof on the block, and asphalt shingles often lose that fight.

That is why more homeowners in 68526 are calling Lincoln Metal Roofing. We install, repair, and replace metal roofs built for this exact mix of prairie wind, hail, and freeze-thaw cycles. Whether you are in one of the newer two-story builds off Yankee Hill Road or on a farmstead east of town, we know how the weather treats a roof here.

Metal Roofing in Cheney (68526)

Cheney is a little different from older Lincoln neighborhoods. The housing stock here leans newer, with two-story subdivision homes and acreage properties on larger lots, plus corrugated-metal barns and machine sheds out toward the farm edges. That means two things for roofing work. First, the wind has nothing to slow it down across those open fields east of the airport, so fasteners, seams, and panel attachment matter more than they do in a sheltered older neighborhood. Second, the ground here is glaciated plains silt loam, which drains slowly after heavy rain and can leave water sitting near foundations and eaves. We plan panel layout and flashing details around that reality, not against it.

Our team has worked metal roofs across Lincoln and Lancaster County, from standing seam and metal shingle systems on newer homes to screw replacement and re-fastening on ag buildings. We know which profiles hold up to hail, how to detail chimneys and skylights so ice damming does not get a foothold, and how to keep a retrofit over existing shingles within code limits on layer count.

Our services in Cheney

How a Job Works in Cheney

Step 1: You call (402) 858-4652 or request a free estimate. We schedule an on-site assessment, walk the roof and attic, check fasteners, seams, flashing, and gutters, and talk through what we find. No pressure, no vague numbers.

Step 2: Once you approve the scope, we pull the required roofing permit through the local building department and coordinate any HOA design review if your subdivision has one. On Cheney lots, access can be tight or the grade uneven, so we plan staging and material delivery ahead of time. Our insured crews handle the installation or repair, and we keep you posted on progress.

Step 3: We clean up thoroughly, haul away old material and debris, and do a final walkthrough with you. We check that gutters flow, fasteners are set, and every flashing detail is sealed before we call the job done.

Pricing in Cheney depends on the job, but here are realistic starting points. Metal roof installation starts at $8 per square foot, standing seam at $10, metal roof replacement at $9, and a retrofit over existing shingles at $7. Corrugated and ribbed panel roofing starts at $5.50 per square foot, metal shingle and stone-coated steel at $9, and copper or specialty metal at $20. Repairs and leak fixes start at $450, screw replacement and re-fastening at $750, flashing and chimney repair at $600, and snow guards at $1,200. Gutters run from $9 per linear foot. The biggest cost factors are roof size and pitch, access and staging, the condition of the existing roof, and how urgent the work is. Call (402) 858-4652 for a free estimate that fits your property.

My house is in one of the newer subdivisions off Yankee Hill Road and the wind out here really whips across the fields. Will a metal roof hold up better than my asphalt shingles?
Yes, and that open-field wind is exactly why we recommend it. Metal panels, especially standing seam with concealed fasteners, resist wind uplift far better than shingles. We also check attachment schedules and fastener spacing for exposed sites like yours so the roof is anchored for the gusts that come across those fields east of the airport.
A storm just peeled back some panels on my barn east of Cheney. How fast can you get out here?
Call (402) 858-4652 and we will schedule a free storm and wind damage inspection as soon as we can. We prioritize active leaks and lifted panels, document the damage for your insurance claim, and make temporary repairs if needed before the permanent fix. We never promise coverage, but we do handle the paperwork side carefully.
What does a typical metal roof replacement cost for a two-story home in Cheney?
Most two-story homes here land somewhere in the range of $9 to $14 per square foot for replacement, depending on roof size, pitch, and whether we are removing one layer or more. Standing seam runs higher, around $10 and up per square foot. Access and staging on your lot can also affect the number. We give you a firm written estimate after the free inspection.
Do I need a permit to replace my roof in Cheney, and who handles it?
Roofing permits are commonly required for a full replacement or re-roof, and thresholds and inspection requirements vary by jurisdiction. We confirm the rules with the local building department before work starts and pull the permit as part of the job. If your home is in an area with historic or HOA design review, we also help coordinate that approval.
My neighbor and I share a property line and I am worried about where my new roof drains. How do you handle that?
We plan gutter and downspout placement so water discharges on your own property and does not create a problem next door. If your subdivision has an HOA, we coordinate color and profile approval before ordering materials. Property line questions are best settled with your neighbor and your survey, and we are happy to walk the lot with you.
Is your crew covered by insurance for work on my Cheney property?
Yes. We are fully insured with general liability and workers' compensation coverage. That protects you and your property if anything goes wrong on the job, and we are glad to provide proof of coverage before we start.
What maintenance should I do on a metal roof in Cheney to get ahead of ice damming and spring hail?
Have the roof inspected in fall before the freeze-thaw season and again after spring storms. We check fasteners, sealant at flashing and penetrations, and gutter flow, since ice damming at the eaves is common on steeper homes here. Clearing gutters and keeping snow from piling at the eaves helps, and a quick screw check after a big hail event catches small problems before they become leaks.
Why choose us?

Trusted professionals in Lincoln

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Lincoln

All your work handled by qualified professionals in Lincoln

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

217+ Verified Client Reviews in Lincoln

⭐⭐⭐⭐⭐ 4.9/5 · 217 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Lincoln · Response within 24h · No commitment · ☎ (402) 858-4652

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Lincoln ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm