Serving the Lincoln area  ·  (402) 858-4652  ·  Open Mon-Sun 7am-7pm
📞 (402) 858-4652 Free Quote

Metal Roofing in Crete, NE (68333) · Local Professionals

Lincoln Metal Roofing · Fast response in Crete and the Lincoln area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+217Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Crete, Nebraska, is a town where the brick downtown and the farmsteads along the Blue River tell you everything about the roofs above them. The older homes near the courthouse square and the grain operations out on the edge of town take a beating from hail, wind, and heavy snow, and that is exactly the kind of work we do.

Homeowners in Crete (68333) call Lincoln Metal Roofing because we understand the mix of historic brick homes and working agricultural buildings here. Whether it is a porch roof on a 1920s house near Doane University or a machine shed out on a gravel road, we bring the same insured crews and straight answers.

Metal Roofing in Crete (68333)

Crete sits in the Blue River valley, and the ground here is a mix of rich silty loam and older clay that moves with the freeze-thaw cycles. That means flashing details around chimneys and eaves need to be done right the first time, because water will find any gap. The housing stock ranges from late-1800s brick commercial buildings downtown to mid-century ranches and newer subdivisions on the north side. Many of the older homes have steep roofs and limited access, so we plan staging carefully to avoid damaging landscaping or brickwork. On the farm edges toward Dorchester and Swanton, corrugated metal barns and machine sheds are common, and we repair and replace those panels with the same materials that have kept them dry for decades.

Our team has worked across Lincoln and the surrounding counties, and we know how Crete's mix of historic properties and agricultural buildings demands a flexible approach. We are fully insured with general liability and workers' compensation, so you are covered from the first day on site.

Our services in Crete

How a Job Works in Crete

Step 1: You call us at (402) 858-4652 or request a free estimate online. We schedule an on-site assessment at your Crete property, usually within a few days, and we walk the roof with you to identify any issues. We check flashing, fasteners, seams, and drainage, and we take photos so you can see exactly what we see.

Step 2: Once you approve the scope and price, we pull the required permits with the City of Crete and schedule the work. For homes near the downtown historic district, we coordinate with any design review requirements before ordering materials. On tight lots or properties with steep driveways, we plan delivery and staging to keep access clear for you and your neighbors.

Step 3: After the installation or repair, we clean up thoroughly, including a magnet sweep for nails and a final walkthrough with you. We do not leave until you are satisfied and the site is as clean as we found it.

Pricing in Crete depends on the size and pitch of your roof, the material you choose, and the condition of the existing structure. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10, and replacement at $9. If you are going over existing shingles, retrofit starts at $7 per square foot, but keep in mind local code limits how many layers you can cover. Repairs start at $450, and screw replacement or re-fastening starts at $750. For a typical Crete ranch home, a full replacement might land in the $12,000 to $20,000 range, while a smaller repair could be a few hundred dollars. We give you a written estimate after inspecting your roof, and we explain all the factors so you can make an informed decision. Call (402) 858-4652 for a free estimate.

My house is near the Doane University campus and has a steep roof with original brick chimneys. Can you match metal roofing to that style?
Yes. We work with standing seam, metal shingle, and stone-coated steel profiles that complement historic homes. For brick chimneys, we use custom flashing and counterflashing to ensure a watertight seal without damaging the masonry. We can also recommend colors that fit the character of the neighborhood.
A storm just blew through Crete and lifted some panels on my barn roof. How quickly can you respond?
We prioritize storm damage calls. Call us at (402) 858-4652 and we will schedule an inspection as soon as possible, often within 24 to 48 hours depending on demand. We can tarp or secure the area temporarily if needed and provide a written estimate for permanent repairs.
What does a metal roof replacement cost for a typical Crete home?
Most Crete homes fall between $12,000 and $20,000 for a full replacement, depending on square footage, roof pitch, and material. Standing seam and stone-coated steel are at the higher end, while corrugated panels are more economical. We provide a detailed estimate after a free inspection.
Do I need a permit from the City of Crete for a metal roof replacement?
Yes, a roofing permit is typically required for a full replacement or re-roof in Crete. The exact requirements and fees are set by the City of Crete Building Department, so we always verify the current rules before starting work. We handle the permit application for you.
My neighbor and I share a property line, and I want to make sure my new metal roof does not cause drainage issues on their side. What should I do?
We can adjust gutter and downspout placement to direct water away from the property line. If your home is in an HOA, we also help you get approval for the panel profile and color. We recommend reviewing your plat or survey to confirm setbacks before finalizing the design.
Are you insured for work on my Crete property?
Yes, we are fully insured with general liability and workers' compensation coverage.
What maintenance does a metal roof need in Crete's climate?
Inspect fasteners and seals annually, especially after hail or high winds. Clear debris from gutters and valleys to prevent ice damming in winter. We offer inspection and maintenance plans to keep your roof in top shape.
Why choose us?

Trusted professionals in Lincoln

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Lincoln

All your work handled by qualified professionals in Lincoln

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

217+ Verified Client Reviews in Lincoln

⭐⭐⭐⭐⭐ 4.9/5 · 217 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Lincoln · Response within 24h · No commitment · ☎ (402) 858-4652

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Lincoln ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm