Serving the Lincoln area  ·  (402) 858-4652  ·  Open Mon-Sun 7am-7pm
📞 (402) 858-4652 Free Quote

Metal Roofing in Malcolm, NE (68402) · Local Professionals

Lincoln Metal Roofing · Fast response in Malcolm and the Lincoln area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+217Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Malcolm is a small town in Lancaster County where the grain elevators and machine sheds sit right alongside ranch homes and acreages, and the wind comes off the open prairie with nothing to stop it. If you live out here, you already know your roof takes a beating from hail, straight-line winds, and the freeze-thaw cycles that work on every flashing and fastener.

Homeowners and property managers in Malcolm (68402) call Lincoln Metal Roofing because we understand the mix of rural and residential roofs here, from corrugated panel on a barn to standing seam on a new build. We are based in Lincoln and serve Malcolm and the surrounding areas, and we are fully insured with general liability and workers' compensation. When a storm rolls through or an old shingle roof starts to fail, we are the local crew that shows up.

Metal Roofing in Malcolm (68402)

Malcolm sits in open grain country, and that means two things for your roof: wind and hail. The same open sky that gives you those golden prairie sunsets sends straight-line winds across the fields that can lift panels, shear fasteners, and drive rain into places you would not expect. Properties here range from older farmhouses and machine sheds with corrugated metal to newer acreage homes and subdivision houses with asphalt shingles. A lot of the outbuildings were built decades ago, and their roofs are reaching the end of their service life. We handle corrugated and ribbed panel roofing, standing seam, metal shingle, stone-coated steel, and retrofit over existing shingles. The ground here is silty loam over glaciated plains, and drainage around eaves and downspouts matters, especially on flat or low-slope shed roofs. Access can be tight on older farmsteads with mature trees and gravel drives, and we plan for that before we start.

Our team has worked on roofs across Lancaster County, from the historic homes in Lincoln to the farm edges toward Crete, Malcolm, and Raymond. We know how to deal with the specific challenges of this area, and we bring that experience to every Malcolm job, whether it is a small repair or a full replacement.

Our services in Malcolm

How a Job Works in Malcolm

Step 1: You call us at (402) 858-4652 or request a free estimate online. We schedule a time to come out to your Malcolm property, inspect the roof, and talk through what you are seeing. We check for hail damage, wind-lifted panels, failed fasteners, flashing gaps, and signs of ice damming at the eaves. You get a clear written estimate with options, and we answer every question before you decide.

Step 2: Once you approve the work, we handle the details. If your project needs a permit, we pull it through the local jurisdiction and schedule inspections as required. For properties in a historic district or with an HOA, we help you understand any design review requirements for panel profile and color. On the day of installation, our insured crew arrives with the materials and equipment, protects your landscaping and driveway, and gets to work. We keep you informed on progress and any surprises we find under the old roof.

Step 3: When the job is done, we clean up thoroughly. We magnet-sweep for nails, haul away old materials, and do a final walkthrough with you to make sure you are satisfied. We do not leave until your property is clean and you know how to care for your new metal roof.

Pricing for metal roofing in Malcolm depends on the size and pitch of your roof, the material you choose, access, and the condition of the existing roof. As a ballpark, corrugated and ribbed panel roofing starts around $5.50 per square foot, metal roof installation starts at $8 per square foot, and standing seam starts at $10 per square foot. A metal roof replacement starts at $9 per square foot, and a retrofit over existing shingles starts at $7 per square foot. For repairs, metal roof repair and leak repair start at $450, screw replacement and re-fastening starts at $750, and flashing, chimney, and skylight repair starts at $600. Snow guards and ice protection start at $1,200, and gutters for metal roofs start at $9 per linear foot. We give free estimates, so call (402) 858-4652 and we will give you a real number for your Malcolm property.

My machine shed near Malcolm has old corrugated panels that are rusting through. Can you replace just the panels or do I need a whole new roof?
We can often replace individual panels or sections if the structure and purlins are still sound, but rust that has spread across the whole roof usually means a full replacement is more cost-effective. We will inspect the framing and fasteners and give you honest options. Call us at (402) 858-4652 to set up a free assessment.
A storm just blew through Malcolm and some panels are lifted. How fast can you get out here?
We prioritize storm and wind damage calls in Malcolm and the surrounding area. Call (402) 858-4652 and we will schedule the soonest available inspection, often within a day or two depending on demand. We can tarp or secure the roof temporarily if needed and give you a repair estimate.
What does a typical metal roof replacement cost for a ranch home in Malcolm?
For a typical ranch home, most metal roof replacements fall in the range of $9 to $14 per square foot installed, depending on the material and complexity. A 1,500 square foot roof might run roughly $13,500 to $21,000. We provide a free estimate so you get an accurate number for your specific roof.
Do I need a permit for a metal roof in Malcolm?
Roofing permits are commonly required for a full replacement or re-roof, and requirements vary by jurisdiction. We handle the permit process for you and make sure the work meets local code. We always defer to the local building department for the final word on rules and inspections.
My neighbor's tree hangs over my property line and drops limbs on my roof. Who is responsible?
In general, you can trim branches that overhang your property line, but you cannot force your neighbor to remove the tree unless it is a hazard. If a limb from their tree damages your roof, their insurance may be responsible, but it is best to document the damage and talk with your neighbor first. We can inspect and repair any damage and provide documentation for insurance.
Are you insured for work on my Malcolm property?
Yes, we are fully insured with general liability and workers' compensation coverage.
What maintenance does a metal roof need in Malcolm's climate?
In Malcolm, the main things to watch are fasteners that back out from wind, seals around flashing and penetrations, and debris buildup in valleys and gutters. We recommend an inspection after major hail or wind events and every couple of years. We offer free estimates for inspections and can handle any repairs.
Why choose us?

Trusted professionals in Lincoln

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Lincoln

All your work handled by qualified professionals in Lincoln

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

217+ Verified Client Reviews in Lincoln

⭐⭐⭐⭐⭐ 4.9/5 · 217 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Lincoln · Response within 24h · No commitment · ☎ (402) 858-4652

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Lincoln ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm