Serving the Lincoln area  ·  (402) 858-4652  ·  Open Mon-Sun 7am-7pm
📞 (402) 858-4652 Free Quote

Metal Roofing in Raymond, NE (68428) · Local Professionals

Lincoln Metal Roofing · Fast response in Raymond and the Lincoln area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+217Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Raymond, Nebraska is a small farm town north of Lincoln where open lots and machine sheds sit right next to family homes, and the wind never seems to stop. If you live here, you know the drill: straight-line gusts in spring, hail that comes out of nowhere, and roofs that take a beating year after year.

That's why folks in Raymond (68428) call Lincoln Metal Roofing. We're based just down the road in Lincoln, and we've spent years working on everything from corrugated barn roofs to standing seam on new construction. When a storm rolls through, we're close enough to get out and take a look without a long wait.

Metal Roofing in Raymond (68428)

Raymond sits on the glaciated plains of eastern Nebraska, and the ground here is mostly rich silty loam, which can get soft after a heavy rain. That matters when we're setting up ladders and staging materials, especially on older farmsteads where the grade isn't always level. A lot of properties around Raymond are small farms or acreages with corrugated-metal barns, machine sheds, and grain bins, plus a growing number of homes that have been updated with metal roofs to handle the hail and wind. The open lots mean there's not much to block a straight-line gust, so panels need to be fastened right and seams need to be tight. We also see a lot of ice damming at the eaves on older homes with steep roofs, especially after a deep freeze-thaw cycle.

Our team has worked all over Lancaster County, from the older neighborhoods in Lincoln to the farm edges toward Raymond, Malcolm, and Crete. We know how to handle the tight spots on a farmstead and the wide-open exposure on a new build. Whether it's a full replacement or a repair after a storm, we bring the same approach: figure out what's actually wrong, explain your options, and get it done right.

Our services in Raymond

How a Job Works in Raymond

Step 1: You call us at (402) 858-4652 or fill out our contact form, and we set up a free on-site assessment. We'll walk the roof, check the flashing, seams, and fasteners, and take a look at the gutters and any skylights or chimneys. You'll get a clear written estimate with options, no pressure.

Step 2: Once you approve the scope, we pull the required roofing permit from the local building department (rules vary by jurisdiction, so we always verify before we start). If you're in an HOA or a historic district, we'll help coordinate the design review so the panel profile and color meet the rules. On tight farm lots, we plan material delivery and staging to keep access clear. Our crews are fully insured, and we protect your landscaping and outbuildings while we work.

Step 3: When the job is done, we do a full cleanup, magnet sweep for nails, and a final walkthrough with you. We make sure you know how the new roof works and what to watch for. We leave your property clean, every time.

Pricing in Raymond depends on the size and condition of your roof, access, and how soon you need it done. For a typical metal roof installation, you're looking at starting around $8 per square foot, with standing seam starting at $10 per square foot and metal roof replacement starting at $9 per square foot. If you're retrofitting over existing shingles, that starts at $7 per square foot. Repairs start at $450, and screw replacement or re-fastening starts at $750. We also offer free estimates for storm and wind damage repair and commercial and agricultural metal roofing. Every roof is different, so the best way to get an accurate number is to call us at (402) 858-4652 for a free estimate. We'll give you a straight answer and no surprises.

My barn roof near Raymond has loose screws and a few panels that flap in the wind. Can you fix that without replacing the whole roof?
Yes, we can. Screw replacement and re-fastening is one of our most common jobs on farm buildings around Raymond. We'll inspect the panels, replace the failed fasteners with the right screws and washers, and re-secure any lifted panels. If the panels are too far gone, we'll tell you straight and give you options for repair or replacement.
A storm just took off some shingles and I've got a leak. How fast can you get to Raymond for an emergency repair?
We prioritize active leaks and storm damage. Call us at (402) 858-4652 and we'll schedule the soonest available inspection, often within a day or two depending on the season. We'll tarp or patch the leak to stop further damage and then give you a full repair estimate.
What does a metal roof cost for a typical ranch home in Raymond?
For a standard ranch home, most metal roof installations start around $8 per square foot, but the final price depends on the roof size, pitch, whether we're removing old shingles, and the panel type you choose. Standing seam runs more, starting at $10 per square foot. Call us for a free estimate and we'll give you a written quote.
Do I need a permit to replace my roof in Raymond?
In most cases, yes. Roofing permits are commonly required for a full replacement or re-roof, and the thresholds, fees, and inspection requirements vary by jurisdiction. We always check with the local building department before starting work and handle the permit process for you.
My neighbor says my new metal roof might cross the property line. What should I do?
Property lines can be tricky, especially on older farmsteads. We recommend having a survey done if there's any question. If you're in an HOA, we'll help coordinate the approval process and make sure the installation meets any design rules. We'll work with you to keep things smooth.
Are you fully insured for roofing work at my Raymond property?
Yes, we are fully insured with general liability and workers' compensation coverage. We're happy to provide proof of insurance before we start any work.
What should I do to maintain my metal roof in Raymond's climate?
Keep gutters clear, especially before winter, and check for loose screws or lifted panels after big storms. Ice damming can be an issue at the eaves, so make sure your attic is properly insulated and ventilated. We offer free inspections if you want a professional to take a look.
Why choose us?

Trusted professionals in Lincoln

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Lincoln

All your work handled by qualified professionals in Lincoln

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

217+ Verified Client Reviews in Lincoln

⭐⭐⭐⭐⭐ 4.9/5 · 217 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Lincoln · Response within 24h · No commitment · ☎ (402) 858-4652

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Lincoln ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm