Serving the Lincoln area  ·  (402) 858-4652  ·  Open Mon-Sun 7am-7pm
📞 (402) 858-4652 Free Quote

Metal Roofing in Firth, NE (68358) · Local Professionals

Lincoln Metal Roofing · Fast response in Firth and the Lincoln area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+217Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Firth is a small farming town just southwest of Lincoln, where the wind comes across the open fields and hits everything from older farmhouses to newer builds on the edge of town. The mix of corrugated barns, machine sheds, and homes with asphalt shingles means roofs here take a beating from hail and straight-line winds. If you live near the Firth School or along the main roads like 1st Street, you know how fast a storm can roll in off the plains.

That's why homeowners in Firth (68358) call Lincoln Metal Roofing. We're based in Lincoln, just up the road, and we've worked on everything from metal barns to brick ranches in this area. We know the local building department, the wind patterns, and the kind of damage that shows up after a spring hailstorm. When you need a roof that can handle Nebraska weather, we're the team to call.

Metal Roofing in Firth (68358)

Firth sits on the glaciated plains of eastern Nebraska, with rich silty loam and a lot of open ground. The town itself has a mix of older homes, some from the early 1900s, and newer construction on the edges. Many properties have detached garages, sheds, or barns, and the lots are often long and narrow. The wind here is constant, and hail is a real threat in the spring. Metal roofs are a smart choice because they resist impact and shed water quickly, but installation has to be done right to handle the local conditions. We pay attention to things like fastener placement, panel overlap, and flashing details, because those are the spots that fail first in high winds.

Our team has years of experience serving Firth and the surrounding Lincoln area. We've worked on farm buildings, commercial shops, and homes, and we understand the specific challenges of roofing in this part of Lancaster County. Whether you need a new standing seam roof on your house or a repair on a corrugated barn, we have the tools and knowledge to get it done correctly.

Our services in Firth

How a Job Works in Firth

Step 1: You call us at (402) 858-4652 or fill out our contact form. We'll schedule a free on-site assessment at your property in Firth. We'll look at your current roof, check for damage, and talk with you about what you want. We'll also check for any local permit requirements or HOA rules that might affect the project. You'll get a written estimate with clear pricing before any work begins.

Step 2: Once you approve the estimate, we'll order materials and schedule the work. In Firth, access can sometimes be tight on older lots, so we'll plan accordingly. If your property is in a historic district or has HOA design rules, we'll help you navigate the approval process. We'll also pull any necessary permits from the local building department. Our crew will arrive on time, protect your landscaping, and work efficiently to minimize disruption.

Step 3: After the roof is installed or repaired, we'll do a thorough cleanup. We'll walk the property with you to make sure you're satisfied, and we'll haul away all debris. We leave your place clean and tidy. We also offer a final inspection to ensure everything meets our standards and yours.

Pricing for metal roofing in Firth depends on the size of your roof, the material you choose, and the condition of the existing structure. For a typical home, metal roof installation starts at $8 per square foot, and standing seam starts at $10 per square foot. If you're replacing an old roof, that starts at $9 per square foot. A metal roof over existing shingles (retrofit) starts at $7 per square foot. Smaller jobs like repairs start at $450, and screw replacement or re-fastening starts at $750. We also offer coatings, gutters, and snow guards. Every project is different, so the best way to get an accurate price is to call us at (402) 858-4652 for a free estimate. We'll give you a straightforward quote with no surprises.

My house is near the Firth School, and we get a lot of wind. Will a metal roof hold up better than shingles?
Yes, metal roofs are much more resistant to wind uplift than asphalt shingles. In Firth, where straight-line winds are common, a properly installed metal roof with the right fasteners and panel profile can handle high winds better. We often recommend standing seam or corrugated panels with concealed fasteners for the best wind resistance. We can assess your specific location and roof shape to recommend the best option.
A storm just came through Firth and I have a leak. How fast can you get here for an emergency repair?
We prioritize storm damage and active leaks. Call us at (402) 858-4652, and we'll schedule an inspection as soon as possible. In many cases, we can get to Firth within 24 to 48 hours, depending on the volume of calls. We'll tarp or temporarily stop the leak if needed, then give you a permanent repair estimate.
What's the average cost for a metal roof on a typical Firth home?
For a standard ranch or two-story home in Firth, most metal roof installations fall between $8 and $12 per square foot, depending on the material and complexity. A 1,500 square foot roof might cost roughly $12,000 to $18,000 for installation. Repairs are often $450 to $1,500. We provide free estimates so you can get an exact price for your home.
Do I need a permit for a metal roof in Firth?
Roofing permits are typically required for a full replacement or re-roof in Firth. The rules and fees are set by the local building department, so we always recommend checking with them before starting work. We can help you understand the requirements and pull the permit for you. Keep in mind that permit thresholds and inspection requirements can vary, so it's best to verify with the city.
My neighbor's tree branches hang over my roof. Can I trim them, and will my HOA care about the metal roof color?
You generally have the right to trim branches that cross your property line, but it's best to talk with your neighbor first. For HOA rules, many subdivisions in the Firth area have design guidelines that may restrict roof color or panel style. We can provide color samples and documentation to help you get approval. If you're unsure, check your HOA covenants or contact your board.
Are you fully insured for work at my Firth property?
Yes, Lincoln Metal Roofing is fully insured. We carry general liability insurance and workers' compensation coverage for all our crews. This protects you and your property in case of an accident.
What maintenance does a metal roof need in Firth's climate?
In Firth, metal roofs should be inspected annually, especially after hail or wind storms. Check for loose fasteners, damaged panels, and debris buildup in valleys and gutters. We recommend cleaning gutters at least twice a year and touching up any scratches to prevent rust. Snow guards can help prevent ice dams in winter. We offer maintenance plans and inspections to keep your roof in good shape.
Why choose us?

Trusted professionals in Lincoln

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Lincoln

All your work handled by qualified professionals in Lincoln

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

217+ Verified Client Reviews in Lincoln

⭐⭐⭐⭐⭐ 4.9/5 · 217 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Lincoln · Response within 24h · No commitment · ☎ (402) 858-4652

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Lincoln ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm