Serving the Lincoln area  ·  (402) 858-4652  ·  Open Mon-Sun 7am-7pm
📞 (402) 858-4652 Free Quote

Metal Roofing in Lincoln, NE (68503) · Local Professionals

Lincoln Metal Roofing · Fast response in Lincoln and the Lincoln area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+217Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Lincoln's older neighborhoods tell the story of this city in brick and shingle. From the steep-roofed Victorians and foursquares in Near South and the Country Club area to the 1950s ranches out toward Bethany and the newer two-story subdivisions spreading south and northeast, every block has its own roofing quirks. Set on the glaciated plains along Salt Creek, under the limestone-and-brick Capitol tower, these homes take a beating from spring hail, tornado-season wind, and hard freeze-thaw cycles that work on flashing and eaves all winter long.

That's why homeowners in 68503 and across Lincoln call Lincoln Metal Roofing. We know the brick warehouses and loft buildings in the Haymarket, the Craftsman bungalows in Hartley and Woods Park, and the corrugated-metal barns out toward Malcolm and Raymond. Our insured crews handle metal roof installation, repair, and storm damage, and we've seen what a Nebraska hailstorm can do to a cheap fastener or a poorly sealed seam.

Metal Roofing in Lincoln (68503)

Roofing here is shaped by the ground as much as the sky. The rich silty loam and clay soils around Salt Creek hold moisture after heavy rain, and that moisture finds its way into eaves and flashing on older homes with shallow overhangs. The tree canopy (American elms, honeylocusts, oaks, cottonwoods, and maples) shades the older streets but also drops limbs and fills gutters, which is why we see so many ice dams at the eaves on high-pitch Victorians and foursquares. Tight lots in Near South and the Country Club area mean staging materials carefully and often hand-carrying panels to avoid damaging brick walks and mature landscaping. Out on the farm edges toward Crete and Hickman, wide-open exposure means wind-driven rain and straight-line gusts test every screw and seam.

Our team has worked on everything from 1880s brick Victorians with steep roofs to 1980s subdivision homes with asphalt shingles ready for a standing seam or stone-coated steel upgrade. We understand how hail impacts different panel profiles and how freeze-thaw cycles stress flashing details, so we build those details to last in this climate.

Our services in Lincoln

How a Job Works in Lincoln

Step 1: Call us at (402) 858-4652 or request a free on-site assessment. We'll walk the roof, check fasteners, seams, flashing, and attic ventilation, and give you a straight answer on whether repair or replacement makes sense. For storm damage, we document everything for your insurance claim, but coverage decisions are always up to your carrier.

Step 2: Once you approve the scope, we schedule the work around Lincoln weather windows and pull the required roofing permits. We coordinate with your HOA if your neighborhood has design review, and we plan deliveries and staging for tight driveways or narrow alleys in older parts of town. Our crews are fully insured, and we protect landscaping and brick walkways as if they were our own.

Step 3: Cleanup and final walkthrough. We magnet-sweep for nails, haul away old materials, and walk the finished roof with you so you know exactly what was done. We leave your property clean and your questions answered.

Pricing in Lincoln depends on the roof size, pitch, access, and condition of the existing deck and flashing. As a ballpark: metal roof installation starts at $8 per square foot, standing seam at $10, metal roof replacement at $9, and a retrofit over existing shingles at $7. Corrugated and ribbed panel roofing starts at $5.50, metal shingle and stone-coated steel at $9, and copper or specialty metal at $20. Repairs and leak fixes start at $450, screw replacement and re-fastening at $750, and flashing or chimney repair at $600. Snow guards start at $1,200, and gutters for metal roofs run from $9 per linear foot. We give free estimates at (402) 858-4652, and we'll tell you honestly if a repair will get you another decade or if it's time to replace.

My 1920s brick foursquare in Near South has steep roof pitches and original flashing. Can you match metal roofing to that style?
Yes. We regularly work on steep-pitch Victorians and foursquares in Near South and the Country Club area. We can match panel profiles and colors to complement the brick and trim, and we pay close attention to flashing details at chimneys and dormers because those are the spots that fail first in freeze-thaw cycles. We'll walk the roof and show you options that respect the home's character.
A spring hailstorm just hit our neighborhood in south Lincoln. How fast can you respond for storm damage?
We offer free storm and wind damage inspections, and we prioritize active leaks and wind-lifted panels. Call (402) 858-4652 and we'll schedule an assessment as soon as possible. We document damage for your insurance claim, but we never promise coverage or suggest a deductible can be waived. Your carrier makes that call.
What does a typical metal roof replacement cost for a 1950s ranch in Bethany or Belmont?
Most 1950s ranches in those neighborhoods fall in the $9 to $12 per square foot range for replacement, depending on roof size, access, and whether we need to repair decking or flashing. A retrofit over existing shingles can start lower, around $7 per square foot, if the existing layers and deck meet code. We give a firm free estimate at (402) 858-4652 after inspecting the roof.
Do I need a permit for a metal roof replacement in Lincoln, and how does the city handle inspections?
Roofing permits are commonly required for a full replacement or re-roof, and thresholds, fees, and inspection requirements vary. We always defer to the local building department for the final word, and you can check current rules through the City of Lincoln website. We handle the permit application and coordinate inspections as part of the job.
My HOA has design rules, and my neighbor's tree limbs hang over my roof line. How do you handle that?
We coordinate with HOAs on panel profile and color approvals before ordering materials. For overhanging limbs, we recommend talking with your neighbor about trimming, and we can trim back what's safely reachable during the job. Property line disputes are a neighbor matter, but we'll flag any access issues during the free assessment so there are no surprises.
Are you fully insured for work on my Lincoln property?
Yes. Lincoln Metal Roofing is fully insured with general liability and workers' compensation coverage. We're happy to provide proof of insurance before work begins so you have peace of mind.
What maintenance does a metal roof need in Lincoln's climate, especially before winter?
Inspect fasteners and seams each fall, clear gutters and downspouts of elm and honeylocust debris, and check flashing at chimneys and skylights before the first hard freeze. Ice damming is common at eaves on older homes, so snow guards and proper attic insulation help. We offer inspections and can re-fasten or replace screws starting at $750 to keep your roof tight through Nebraska's freeze-thaw cycles.
Why choose us?

Trusted professionals in Lincoln

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Lincoln

All your work handled by qualified professionals in Lincoln

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

217+ Verified Client Reviews in Lincoln

⭐⭐⭐⭐⭐ 4.9/5 · 217 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Lincoln · Response within 24h · No commitment · ☎ (402) 858-4652

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Lincoln ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm